Dr. Fixit Construction Chemical And Products

Product Details:

Description:
Dr. Fixit Pidiseal PS is a two-part elastomeric sealant based on a liquid polysulphide polymer, which when mixed with accelerator (curing agent) cures by chemical reaction to form a tough, flexible rubber seal. It is used for construction, expansion & contraction joint application to seal the joint hermatically as it has excellent tensile modulus, elongation, bonding, UV & ozone resistance and weathering durability.

Areas of Application:

• Sealing of moving and construction joints as well as joints between different construction materials in high rise buildings, roof terraces & ceilings, structural expansion joints running through the ceiling.
•  Internal and external wall claddings.
•  Sealing of joints in water retaining structures such as     Reservoirs, Dams, Canals, and Culverts.
• Vehicular and pedestrian traffic pavements of concrete

Features & Benefits
£ Vertical sagging – PS 41G is used for vertical sealing joints.
£ Pourable & self-levelling – PS 42P is used for horizontal joint sealing.
£ Curing – Cures at ambient temperature. £ Elasticity – High elasticity and forms tough seal.
£ Adhesion/Bonding - Bonds strongly to a wide range of building materials. £ Cyclic Movements - Accommodates continuous and pronounced cyclic movements. £ Shrinkage - Negligible.
£ UV & Ozone resistance - Resistant to sunlight (UV rays) and ozone.
£ Biodegradation - Good resistance to bio-degradation
£ Chemical resistance - Resistant to occasional spillage of dilute acids, alkalis, petrol, aviation fuels, diesel, kerosene, lubricating oils etc.
£ Toxicity - It is Non-toxic. 
Precautions & Limitations
£ Maximum width for application in a joint is 50 mm.
£ Do not expose the sealant to high temperatures.
£ Sealant will not adhere to substrates with contamination and traces of bitumen.
£ Adhesion of the sealant must only be on two opposite joint faces.
£ Do not carry out sealing operations during hot temperature conditions.
£ Use of shalitex board as a back up material should be avoided.
£ Pouring Grade version must only be applied in horizontal joints.
£ Application to be started only after 30 minutes of priming the substrate.

Product Details:

Description:
An acrylic polymer based economical elastomeric waterproofing system for protecting concrete & masonry surfaces.

Areas of Application:
Concrete structures like sunken portion, toilets, balcony, basement, chajjahs, terrace, concrete repairs and water retaining structures.

Features & Benefits:

• A tough, hard wearing, breathable waterproofing system for residential, industrial, housing and commercial buildings.
• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Excellent bond to most building materials.
• Reduces or prevents salt penetration into concrete.
• High ultra voilet resistance.
• Highly durable.
• Economical system.

Product Details:

 “Jai Shree Radhey Shyam Enterprises ” are engaged in Wholesale Trading a wide assortment of Construction Chemical, Chemical Primer, Concrete Admixture, Waterproof Coating, etc.

Product Details:

 “Jai Shree Radhey Shyam Enterprises ” are engaged in Wholesale Trading a wide assortment of Construction Chemical, Chemical Primer, Concrete Admixture, Waterproof Coating, etc.

Product Details:

Description:
Dr. Fixit Piditop 333 is composed of best quality ordinary portland cement, properly selected & graded washed & dried aggregates, polymer & additives. It is used as a concrete floor hardener for residential, commercial & industrial floors, because it forms a very high abrasion resistance to fresh concrete floor as a monolithic surface. It improves the strength & impact resistance of concrete floor to allow heavy duty movements.

Areas of Application:

• Heavy industry
• Power stations
• Agricultural buildings & yards   
• Desalination plants
• Distillation plants
• Laboratories
• Abattoirs
• Warehouse floors, loading bays and workshops
•  Steel industries
• Railway platforms

Joint Design:

•  All expansion joints, movement joints are to be brought over through subsequent flooring system & to be treated with sealants.
•  Consult technical team for detailed specification in case of other type of joints.

Product Details:

Description:
Dr. Fixit Samshield XL is a SBS self adhesive waterproofing membrane based on a tropical grade of polymer modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, HDPE Valeron ® film.
The membrane is protected on the self adhesive side with a silicone coated release film.


Features:

• Specially formulated for tropical climate grade.
• Provides protection against water and vapour.
• Self adhesive, requires just peeling off the silicone film and sticking to the surface.
• Excellent adhesion to vertical and horizontal surfaces.
• Excellent resistance to chlorides, sulphates, alkalis and acids.
• Good tear and puncture resistance.
• Excellent tensile strength.

Product Details:

Description:
Dr. Fixit Samshield XL is a SBS self adhesive waterproofing membrane based on a tropical grade of polymer modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, HDPE Valeron ® film. The membrane is protected on the self adhesive side with a silicone coated release film.

Typical Applications:
Dr. Fixit Samshield XL used as waterproofing and damp proofing intended for concrete protection. It may be used for horizontal and vertical application and as a damp proofing course for tanking below ground structures, subways, retaining walls etc.

Features:

• Specially formulated for tropical climate grade.
• Provides protection against water and vapour.
• Self adhesive, requires just peeling off the silicone film and sticking to the surface.
• Excellent adhesion to vertical and horizontal surfaces.
• Excellent resistance to chlorides, sulphates, alkalis and acids.
• Good tear and puncture resistance.
• Excellent tensile strength.

Product Details:

Description:
Dr. Fixit Dampguard is a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium. It has an advantage of dilution with water for application over cementitious surfaces. It is used as an internal coating for the waterproofing treatments of water tanks and building walls because it can be applied over damp surfaces, has excellent water resistance, adhesion, hardness, toughness and sets faster similar to solvent based epoxy formulations.

Areas of Application:

• Waterproofing treatment for RCC water tanks.
• Internal damp treatments.
• As putty with OPC- White cement to fill the fine cracks of internal walls.
• In sterile areas of pharma, food industries & hatcheries

Product Details:

Description:
Dr. Fixit Pidiseal PS is a two-part elastomeric sealant based on a liquid polysulphide polymer which when mixed with accelerator (curing agent) cures by chemical reaction to form a tough, flexible rubber seal. This sealant has excellent Fuel resistance, adhesion to different substrates like masonry, concrete with excellent movement accommodation. It is far more superior to conventional joint sealant materials such as bitumen, mastics and expansion-sheets.

Specification: 

• Meets the requirement of BS 5212 - 1983, BS EN ISO—11600: 2003 Type F & G, Class 25 LM standard.

Areas of Application:

• Parking and cargo areas.
• Sealing of moving and construction joints in bridges & concrete  highways.
•  Airport runways, Aircraft fueling areas
•   Garages & subways.

Product Details:

Description:
Dr. Fixit Micro Concrete is a ready to use dry powder which requires only addition of clean water at site to produce a free flowing non shrink repair micro concrete. It is composed of good quality cement, properly selected aggregates & additives. It is used & designed for repairing of damaged reinforced concrete elements
like columns, beams & structure where the areas are restricted or not easily accessible for proper placement of concrete using vibrator. Dr. Fixit Micro Concrete has excellent flowability, workability & proper particle size to reach small & congested reinforcement.

Product Details:

Description:
Dr. Fixit Pidicrete URP is based on modified styrene butadiene latex supplied as a ready to use bonding agent in liquid consistency. It is used for repair of spalled concrete – floors, columns, beams, chhajas, slabs & waterproofing of toilets & bathrooms, small terraces etc. as it bonds strongly to old & new concrete and to plasters. It reduces shrinkage, prevents cracking, dust pick up & improves abrasion resistance.

Product Details:

Description:
Dr. Fixit Pidiproof LW+ is specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. It is used as an additive for cement concrete, mortar & plasters. It makes concrete cohesive and prevents segregation.

Product Details:

Description:
Dr. Fixit Pidifin 2K is a two component cementitious & acrylic flexible waterproofing & protective coating composed of best quality portaland cement, properly selected & graded aggregates, additives & acrylic emulsion polymer as a binder. It is applied to waterproof and protect concrete and similar structures. specially formulated for swimming pools, retaining walls, pile Heads, water tanks, submerged tunnels, sumps, bridge decks, marbles, granites and a wide variety of extreme service class structures because on curing it forms an excellent elastomeric, waterproof & protective layer over the substrate.

Product Details:

Description:
Dr. Fixit Crack-X Shrinkfree is composed of quality polymers, select fillers & additives. It is fast drying and flexible, light weight, putty like material used for filling cracks in plastered surfaces. It is 100% shrink-free, water resistant after drying & bonds strongly to cementitious substrates.

Areas of Application:
Internal & external surface cracks on plaster upto 10 mm width.