Waterproof Coating

Product Details:

Owing to the consistent efforts of our dedicated team of professionals, we have been constantly engaged in offering the best quality array of Fosroc Brushcrete Waterproof Coating.

Advantages:

• Can be applied in uniform thickness to horizontal and vertical surfaces.
• Develops excellent bond to most building materials.
• Improves mechanical & physical properties of the coating system when used in conjunction with cement.
• Reduces or prevents salt penetration into concrete.
• Resistance to ultraviolet light or by chemicals ranging from mild acids to strong alkalies.
• Is highly impermeable in continuous wet condition.
• Is non-flammable and does not give off toxic gases, when exposed to fire.

Non toxic

Other Details:

• Acrylic Polymer Modified Waterproof Coating

Product Details:

We have gained a huge appreciation in the market by offering an excellent array of Hydroproof Xtra Cement.

Main Uses:

• Non - toxic, non-fl ammable and user friendly
• Provides a tough, impermeable waterproof membrane
• Can be applied by brush, on horizontal and vertical surfaces
• Excellent adhesion to concrete and masonry surfaces
• Protects concrete and mortar from natural elements such as wind, rain, sunlight
• Breathable - allows inside water vapour to escape

Other Details:

• Polymer Cement waterproof coating

Product Details:

Owing to the years of industrial experience, we have been able to provide our valued clients with a wide range of Renderoc FC Fairing Coat Cement.

Other Details:

• Cementitious fairing coat
• cement-based coating
• Cemented mortar for plastering
• cement based thin plaster mortar
• Just add water
• No primer Required
• Excellent bond to substrate
• Add water only
• No primalre necessary
• Excellent support adhesion
• Only Requires addition of water
• Does not need a primer
• Excellent adhesion to the substrate
• Only addition of water
• primerless
• Good attachment to the substrate

Product Details:

Description:
Dr. Fixit POLYPLUS CP is composed of high quality cement, properly selected & graded inert aggregates, proprietary waterproofing active chemicals & additives. It is used as a chemically active waterproofing treatment for concrete. Dr. Fixit POLYPLUS CP when mixed with water and applied as a brush coat to concrete, it penetrates deeply into the capillaries of the concrete & protects it against the permeability of water.

Typical Application:
Water Retaining Structures

• Water tanks & reservoirs
• Swimming pools
• Water treatment works
• Dams & canals
• Concrete pipes
• Harbours

Product Details:

Description:
Dr. Fixit Polyplus Cp Admix is an integral crystalline waterproofing admixture added to the concrete mix at the time of batching. It consists of Portland cement, very fine treated silica sand and various active chemicals. These active chemicals react with the moisture in fresh concrete with the by-products of cement hydration to cause a catalytic reaction, which generates a non-soluble crystalline formation throughout the pores and capillary
tracts of the concrete. Thus the concrete becomes permanently sealed against the penetration of water or liquids from any direction. The concrete is also protected from deterioration due to harsh environmental conditions. The admixture also has the ability to self-seal minor cracks & withstand high level hydrostatic water pressure.


Method of Application:

• Dr. Fixit POLYPLUS CP Admix is a dry powder dosed at 0.8% to 1.2% by weight of the cement and added directly to the mortar during mixing. Maximum 4 kg per cubic meter is allowed.
• For smaller mixes, add prescribed quantity of Dr. Fixit POLYPLUS CP Admix to the sand & coarse aggregates. Mix the components thoroughly for 2-3 minutes before adding the cement & water. The total concrete mass should be blended using standard practices.

Product Details:

Description:
Dr. Fixit Torchshield AP range of polymer modified membranes are modified bitumen waterproofing membranes manufactured by saturating and coating a polyester carrier with a waterproofing compound made of a special grade of modified bitumen with APP polymers. Whereas the modifiers boost the thermal, mechanical and ageing chtaracteristics of the membrane compound, the non woven polyester carrier establishes the mechanical characteristics as it performs as the reinforcement element that provides the membrane with its significant Tensile Strength, Tear Strength, Puncture Resistance and Elongation properties.
The upper and lower surfaces are laminated with polyethylene film

Areas of Application:
Waterproofing and damp-proof membranes for:
Concrete roof (Sloped/Flat roofs)
Basements and swimming pools (Externally)
Car park and irrigation canals lining
Concrete retaining structures
Tunnels and subways

Product Details:

Product Details: